|
|
|
Harvest Steel Floors – 14’ Diameter
Specifications
Ring:
•
6X3/8” (Same ring as 14’
hopper, pre-punched to match bin)
Sheet:
•
14 gauge
•
4 - 3/8” thick tie down lugs welded on |
|
Bolt
Holes:
•
7/16” @
9 ¾” to 10” o.c.
•
Painted top and bottom
•
Solid weld on outside of ring and stitched on inside
•
Adds approximately 60 bushels to bin capacity
•
Set on level gravel pad for support and drainage
•
During installation internal stiffeners must be notched
as would be on a hopper installation. (see stiffener
installation diagram)
|
|
Harvest Steel Floors – 15’, 16’ Diameter
Specifications:
Ring:
•
8X3/8” (Same ring as hopper, pre-punched
to match bin)
Sheet:
• 14 gauge
•4
- 3/8” thick tie down lugs welded on |
|
Bolt
Holes:
•7/16” @
9 ¾” to 10” o.c.
•Painted
top and bottom
•Solid
weld on outside of ring and stitched on inside
•Adds
approximately 100 bushels to bin capacity
•
Set on level gravel pad for
support and drainage
• During
installation internal stiffeners must be notched as
would be on a hopper installation. (see stiffener
installation diagram)
|
|
Harvest Steel Floors
– 18’, 19’, 21’ Diameter
Specifications:
Ring:
•
8X3/8” (Same ring as hopper, pre-punched
to match bin)
Sheet:
•
12 gauge
•
4 - 3/8” thick tie down lugs welded on |
|
Bolt Holes:
•
7/16” @ 9 ¾” to 10” o.c.
•
Painted top and bottom
•
Solid weld on outside of ring and
stitched on inside
•
Adds approximately 200 - 275 bushels to
bin capacity
•
Set on level gravel pad for support and
drainage
•
During installation internal stiffeners
must be notched as would be on a hopper installation.
(see stiffener installation diagram) |
| |